News

Drawing die for different punches The structure of the drawing die is determined according to the geometric shape, dimensional accuracy, material, ...

Stamping parts knowledge Stamping parts are the production technology of parts with a certain shape, size and performance by means of the power of ...

Basic knowledge of stamping die terminology 1. Crimping Flanging is a stamping process in which the edges of a process are rolled into a nearly clo...

What material is the punch of the stamping die made of Die punch generally uses high-speed steel and tungsten steel as materials, high-speed steel ...

What are the main characteristics of mold manufacturing MFC sheet metal forming die, under the action of external forces to make the blank into a s...

The characteristics of CNC machining center According to statistics show that CNC machining center in the current industrial production industry is...

What is wire cutting machining Process introduction Wire cutting is short for CNC wire cutting machining, it is developed on the basis of electric ...

Basic principles and feasibility of tensile parts Deep drawing is a process that can deform steel plates or other non-ferrous materials. With it, t...

Stamping parts common bad and countermeasures About various defects of stamping parts produced by stamping factories, we have analyzed several poin...

Stamping parts common bad and countermeasures Let's take a look at the various defects of stamping parts produced by stamping factories, as well as...

The common bad phenomenon and countermeasure of stamping parts 1. Stamping waste is generated 1) Reasons Poor quality of raw materials; Improper in...

Mold related system composition The mold is composed of a number of related systems, which complement each other, so that the mold can be used norm...