Structural Characteristics Of Progressive Die

Nov 09, 2022

Leave a message

Structural characteristics of progressive die


Structural characteristics of progressive die:


1, the mold is composed of three parts: upper die, lower die and die sleeve, and guided by a guide column;


2. The upper die is provided with a punch in the upper die fixing plate and is connected with a screw in the upper template;


3. The concave die sleeve with a cone hole is loaded into two semi-conical concave dies, with a cavity hole in the middle, and two semi-circular concave dies have two positioning pins;


4, the lower die is composed of the lower die fixed plate with a core and another core;


5. The unloading part is composed of the ejector rod and the ejector plate. After the parts are formed, the upper die is pry open with the special unloading work, and then the ejector rod is used to push the two semi-conical concave dies out of the mold, so that the progressive mold can be separated and the products can be taken out.


5b0988e595225.cdn.sohucs

Send Inquiry