Pursuing progress, seeking knowledge diligently, and practicing diligently will become the common aspirations and actions of Dongmo. The pace is not stopping, and the practice is still going on. Let us look forward to the next wonderful performance of Dongmo metal stamping processing!
East mold metal stamping processing, the main stamping process is punching, blanking, blanking stretching, press bending forming, flanging, trimming, flanging, pressing, shaping, etc. The application is very wide. Various thin-walled parts with cylindrical, rectangular, stepped, spherical, conical, parabolic and other irregular shapes can be made by the stretching process.



With the improvement of the quality of life, Dongmo metal stamping processing has penetrated into various fields, whether it is industrial production or daily life, a variety of metal stamping processing parts are used in many places, which are closely related to our lives and cannot be separated. What technical requirements are needed to produce metal stamping parts to meet customer needs?
1. Chemical analysis and metallographic inspection: Analyze the content of chemical elements in the material, determine the level and uniformity of the material's grain size, evaluate the level of free cementite, band structure and non-metallic inclusions in the material, and check the shrinkage of the material , Looseness and other defects.
2. Material inspection: The materials processed by metal stamping are mainly hot-rolled or cold-rolled (mainly cold-rolled) metal plate and strip materials. The raw materials of Anruo metal stamping processing should have quality certificates, which ensure that the materials meet the required technology Claim. When there is no quality certificate or due to other reasons, the metal stamping parts manufacturer can select raw materials for re-inspection as needed.
3. Chemical analysis and metallographic inspection: Analyze the content of chemical elements in the material, determine the level and uniformity of the material's grain size, evaluate the level of free cementite, band structure and non-metallic inclusions in the material, and check the shrinkage of the material , Looseness and other defects.
