Automobile stamping die design and manufacture
Design principles of automotive stamping die
Combined with years of mould design and manufacturing experience of Dongfang Mould Factory, the mould design of auto parts should follow the following basic principles:
(1) Combined with the parts of the product shape and product detection benchmark, determine a reasonable stamping direction, which is very key. Whether the design of the stamping direction of the car cover is reasonable determines whether the cover can be drawn out of a satisfactory product, and directly affects the process of the supplementary part and the shape of the pressing surface as well as the hardness and service life of the car die.

(2) the determination of the shape of the copy pressing surface of the mold must be effective. The shape of the pressing surface is the primary condition to ensure that the material is not broken and formed smoothly during the drawing process. In order to achieve this purpose, the pressing surface should be formed a certain inclination Angle to reduce the tensile depth, and the flat pressing surface should be formed to achieve the best pressing effect. It is also necessary to maintain a certain geometric relationship between the pressing ring and the punch shape, so that the material is always in a tense state in the process of stretching can smoothly adhere to the punch, do not allow excess material wrinkles, and maintain the best pressing effect. In order to ensure that the press surface is smooth and smooth so that the wool flows into the concave model cavity, the press surface shall not have local bulging, pits and depressions. If the pressing surface is the flange of the drawing part itself and there are bumps and depressions on it, the shaping process should be added. When the Angle between the pressing surface and the stamping direction is greater than 90°, it will increase the feed resistance, so it is not desirable.

(3) the determination of the supplementary surface of the stamping process must be sufficient. Process supplement surface is not only the condition to realize drawing, but also the necessary supplement to increase the degree of deformation and improve the steel degree of parts. It will directly affect the stretch molding and subsequent trimming, shaping, flanging and other processes.
(4) Automobile mold design must be overall planning. For car cover a deep drawing die design must be combined with process in the future, to the overall planning, rational should adopt progressive die design plan for many times, in as much as possible to ensure the product deformation springback amount and surface quality of the premise, reduce the number of progressive, to help enterprises to reduce mold manufacturing costs and maintenance costs, increase production rhythm.
