What should the machining center pay attention to in the operation of machining molds
1. When operating the planer, do not extend your hands and head to the front of the machine for inspection, do not wipe the workpiece and the rotating parts of the machine tool with cotton yarn, and do not measure the workpiece when the head is not steady.
2. Before operating the punching machine, check whether there are cracks in the mold, whether the operating mechanism, automatic stop device, clutch and brake are normal, and whether the lubrication system is short of oil or blocked.
3. It is strictly forbidden to extend hands and tools into the dangerous area. Small pieces must be operated with special tools. When the blank is stuck in the mold, it can only be released with a tool.
4. When punching a workpiece, hands or feet must leave the button or pedal to avoid misoperation. When two people work together, they should appoint someone to drive and pay attention to coordination and cooperation.
5. Do not wear gloves when operating the drilling machine. Girls should wear hard hats and protective covers should be installed in place.
6. When drilling through the hole, pads should be placed on the bottom of the workpiece, and when it is close to drilling through, it should be fed by hand.
7. When operating the lathe, the workpiece must be firmly clamped, and the chuck must be moved by hand to check that there is no collision before driving.
8. When the spindle is running, it is not allowed to change the speed, and when the tool does not leave the workpiece, it is not allowed to change direction suddenly and use reverse braking.
9. When operating the milling machine, it must stop when going up and down the workpiece, tool, firming, adjusting, changing speed and measuring the workpiece.
10. During cutting, the head and hands shall not be close to the milling surface. When unloading the workpiece, the tool must be removed.
11. When operating the grinding machine, people should not stand on the front of the grinding wheel, but stand on the side of the grinding wheel.
