The difference between fast and slow wire cutting
The differences between fast wire cutting and slow wire cutting are as follows: wire speed, electrode wire working state, electrode wire material, wire threading method and length of working electrode wire.
1. Speed of wire walking:
1, fast wire cutting speed is greater than or equal to 2.5m/s, commonly used value 6 to 10m/s.
2. The speed of slow wire cutting is less than or equal to 2.5m/s. Commonly used values 0.25 to 0.001m/s.
2. Working state of electrode wire:
1, fast silk cutting machine is reciprocating for silk, repeated use.
2, the slow walking silk cutting machine is one-way moving, disposable use.
Three, electrode wire material:
1. The electrode wire material of fast walking wire cutting machine tool is molybdenum wire and tungsten molybdenum alloy.
2, and slow wire cutting is the use of brass, copper, copper as the main alloy or plating composite material electrode wire.
Four, threading mode:
1. The threading method of fast walking silk wire cutting can only be manual.
2, and slow thread cutting silk can be manual or automatic.
Five, working electrode wire length:
1, fast wire cutting working electrode wire length is hundreds of meters.
2. The length of the working electrode wire cut by the slow wire is several kilometers.
