There are many types of steel used in metal stamping dies. Many mold factories use 9 silicon chromium (9SiCr) and chromium tungsten manganese (CrWMn). This is one of the good choices, but this kind of material requires higher forging and heat treatment, so you don’t pay attention to it. There will be problems, so you must understand the processing conditions of the material when selecting the mold material. What materials are generally used for metal stamping dies (steel)? You can refer to the following six points:
1. The commonly used material of the template in the stamping die is probably: A3 45# Cr12 Cr12MoV SKD11.
2. Upper and lower mold base: A3 or 45#.
3, backing plate/stop baffle plate: 45# or Cr12.
4. Stripping plate and lower template: Cr12MoV or SKD11 (for thinning or high-precision products, DC53 cryogenic treatment will be selected, which has good stability.) These are sufficient for general molds.
5. The material of the punch parts is generally SKD11. For stainless steel materials, SKH-9 or DC53 or ASP-23 will be selected; DC53 is a bit worse than SKH-9, ASP23 is better than SKH-9; there is also tungsten steel, which is average Only used on special request, expensive.
6. According to the material and thickness of different products, the material and thickness of the template and the material of the parts will be different.
