What Are The Main Parts Of The Stamping Die

Apr 15, 2021

Leave a message

Supporting and clamping parts: it includes upper and lower templates, die handles, fixed plates of convex and concave die, backing plates, stoppers, etc.; upper and lower templates are the basic parts of the die; various other parts are installed and fixed on it respectively. The plane size of the template, especially the front and back direction should be compatible with the workpiece, too large or too small is not conducive to operation. Some molds (blanking, punching molds) need to set a backing plate under the mold base for the convenience of discharging parts. At this time, it is better to connect the backing plate and the template with screws, and the thickness of the two backing plates should be equal. The spacing of the backing plates is subject to the parts that can be delivered, and should not be too large to prevent the template from breaking.


In the production of automobile stamping parts, compared to cold stamping, the hot stamping process can effectively take into account the issues of lightweight and collision safety, and high-strength stamping parts springback and mold wear, which has received attention. Hot stamping is realized through its forming die. Whether the design of the die is reasonable or not will directly affect the efficiency of hot stamping.


When designing the thermoforming mold structure, the main considerations include: the layout of the insert cooling system, the strength of the mold, and the tightness of the mold. Among them, the most critical is the layout of the insert cooling system to ensure that the thermoformed parts have a certain cooling rate after they are formed.


Send Inquiry