The Basic Structure Of The Stamping Die

Nov 22, 2022

Leave a message

The basic structure of the stamping die


Stamping die can be divided into upper die and lower die. The upper die is composed of a die handle (punch), a guide sleeve, a punch, a backing plate, a fixing plate, screws, pins, upper die seat (upper support), and a stripper plate. The lower die is generally composed of the lower die base, the guide plate (side guide plate), the concave die, the baffle plate, the feed plate, the guide post, the screw and the pin.

But we should also pay attention to the above 6 kinds of parts are not all stamping die, especially single process die, but working parts and necessary fixed parts are indispensable.

88

General stamping die is divided into two categories, one is the process parts, this kind of parts directly participate in the completion of the process, and have direct contact with the blank, only to complete the process of the mold does not directly participate in the completion of the process, and do not have direct contact with the blank, only to ensure the completion of the process of the mold, or to improve the function of the mold, including guiding parts, fastening parts, standard Quasi and other parts, etc.



Send Inquiry