Hardware Mold Processing Overhaul Method

Nov 08, 2022

Leave a message

Hardware mold processing overhaul method

High precision stamping quality supplier

Stamping die is a special process equipment that processes materials (metal or non-metal) into parts (or semi-finished products) in cold stamping processing. It is called cold stamping die (commonly known as cold stamping die). Stamping is a pressure processing method that uses a die mounted on a press to exert pressure on a material at room temperature to produce separation or plastic deformation, so as to obtain the required parts. The following by our company to introduce to you about the hardware mold processing maintenance method.

_20190701143933

Maintenance method of hardware mold processing:


(1) Mold loosening: the movement of punching or die exceeds the unilateral clearance. Adjust the combined clearance.


(2) Tilt of the die: the straightness of the die is not correct, or there are foreign bodies between the templates, so that the template can not be pasted flat. Recombination or grinding correction.


(3) template deformation: template hardness or thickness is insufficient, or external impact deformation. Replace the new template or correct the split group working method.


(4) The deformation thickness of the mold base is insufficient or the force is not uniform, and the straightness of the guide column and guide sleeve varies. Grinding straightening or refilling plastic steel or replacing die base or equalizing force.


(5) Interference of the punching die: whether the size and position of the punching die are correct, whether there is deviation in the positioning of the upper and lower die, whether it will loosen after establishment, insufficient accuracy of the punching press, and incorrect mold setting.


(6) Punch deflection: punch strength is not enough, punch size is too close, lateral force is not balanced, punch half inclined. Strengthen the guide protection of the strip inclined plate or increase the punch, small punch grinding short lt increase heel length in advance support guide, pay attention to the feeding length.


Send Inquiry