Hardware molds are used in industrial production to use various presses and special equipment mounted on the press to make metal raw materials into required forms of parts or finished products through pressure. This special equipment is collectively referred to as hardware molds. Then you can tell us about the maintenance methods of hardware molds, and we will also tell you about our maintenance methods for reference only. The following points:
1. The cutting edge must be sharpened after long-term use of the mold, and the cutting edge surface must be demagnetized after grinding. It cannot be magnetized, otherwise it is easy to cause blockage.
2. Springs and other elastic parts are easy to be damaged during use, and they usually appear to be broken and deformed. The method used is exchange. In the process of exchange, you must pay attention to the specification and model of the spring. The specification and model of the spring are confirmed by color, outer diameter and length. Only when the three items are the same can you change it. .
3. The punch is prone to breakage, bend and gnawed during the use of the mold, and the punch sleeve is usually gnawed. The damaged punch and sleeve are usually replaced with parts of the same specification. The parameters of the punch include the size of the working part, the size of the installation part, the length and so on.
4. Fasten parts, check whether the fastened parts are loose or damaged, the method used is to find the parts of the same specification to exchange.
5. Pressing parts such as press plates, Uniglue, etc., unloading parts such as stripper plates, pneumatic ejectors, etc. During recuperation, check the relationship between parts of each part and whether there is damage, repair the damaged part, check whether there is air leakage by pneumatic jacking, and adopt countermeasures for detailed conditions. Replace if the trachea is damaged.
Hengshui Dongfang Mould Factory is a professional manufacturer of metal stamping dies and metal stamping. Based on more than ten years of development, supported by sales, R&D, molds and parts, through the integration of precision mold stamping, hardware, and assembly, we always provide customers with overall solutions. The company has the ability to process large molds and form large parts. In the next 10 years, we will further strengthen the research and development of precision molds and sophisticated hardware, make further efforts to meet customer needs and improve the company's comprehensive service level. https://www.dongmumould.com/
