Custom Precision Metal Stamping And Drawing Dies; Hardware Tool Stamping Dies

Custom Precision Metal Stamping And Drawing Dies; Hardware Tool Stamping Dies
Product Introduction:
Custom Precision Metal Stamping and Drawing Dies; Hardware Tool Stamping Dies
Send Inquiry
Description
Technical Parameters

Discussion on High-Precision Stamping Parts Machining Methods

4

I. Raw Material Selection and Pre-treatment Control

The core of high-precision stamping part machining quality depends on the quality of raw materials. Key practical control points are as follows: Prioritize the use of high-strength steel, 304 stainless steel, and 6061 aluminum alloy, which possess stable mechanical properties and excellent plasticity. This ensures uniform material deformation during stamping and eliminates defects such as cracks and warping. Upon arrival, raw materials must be tested for mechanical properties and thickness uniformity. Thickness deviation should be controlled within ±0.015mm, and there should be no inclusions or porosity. For the material surface, annealing can eliminate internal stress, or coating treatment can improve surface finish. Surface roughness should be controlled within Ra≤0.6μm. This extends the die life and reduces frictional resistance during stamping, laying the foundation for improved machining accuracy.

II. Practical Optimization of Stamping Process Parameters

In high-precision stamping, accurate control of process parameters is the core of achieving efficient forming. Specific operations are as follows: Based on the workpiece size, material, and forming requirements, adjust the stamping force, stamping speed, die clearance, and lubrication conditions through trial molding experiments. Avoid theoretical numerical simulations and ensure parameters closely match actual production. Control the stamping force deviation within ±2%. Adjust the stamping speed to 25-100 strokes/minute according to the complexity of the part, avoiding excessive speed causing material damage and excessively slow speed affecting production efficiency. Set the die clearance to 4%-7% of the material thickness, with a deviation ≤0.002mm, precisely controlling blanking and forming accuracy. Select specialized lubricants: extreme pressure lubricants for stamping high-strength steel and non-stick emulsions for stamping aluminum alloys to reduce friction between the die and the workpiece, ensuring product surface quality and dimensional stability.

product-1080-1440

product-1200-800

III. Application of CNC Equipment and Intelligent Control Systems

High-precision stamping requires advanced CNC equipment and intelligent control systems. Key practical application points are as follows: Employing a fully servo-driven high-precision CNC punch press, coupled with servo drive technology, achieves precise positioning of the slide stroke and stamping position, with a positioning accuracy ≤0.001mm, improving processing repeatability and stability, and achieving a batch production consistency rate ≥99.8%. Introducing an intelligent control system involves installing displacement and pressure sensors at key parts of the punch press to monitor stamping parameters and workpiece forming status in real time. Big data analysis enables fault warnings and timely troubleshooting of issues such as die jamming and parameter deviations. Simultaneously, the system can automatically optimize process parameters based on production data, reducing manual intervention and improving the reliability and production efficiency of the stamping process.

IV. Practical Innovation in Mold Design and Manufacturing

As the core carrier of stamping processing, the design and manufacturing precision of the mold directly determines the quality of the finished product. Key points of practical innovation are as follows: The mold material uses cold work die steels such as Cr12MoV and SKD11, which undergo vacuum quenching + deep cryogenic treatment + low-temperature tempering, with hardness controlled at HRC58-62 to ensure high hardness, high wear resistance, and uniform heat treatment without cracks. Using CAD 3D modeling and FEA finite element analysis technology, the material flow, mold stress, and deformation during the actual stamping process are simulated to optimize the mold cavity, punch, and guiding mechanism structure, improving blanking and forming accuracy. Mold manufacturing employs electrical discharge machining and high-precision CNC milling processes, with key dimensional accuracy controlled within ±0.003mm and form and position tolerances ≤0.002mm, ensuring compliance with design requirements and adaptability to high-precision stamping needs.

product-749-500

Contact Us
Consultation Hotline: +86 15930861038
Whatsapp: 15930861038
Email: dongfangmould@aliyun.com
Service Commitment: Reply to inquiry within 12 hours; provide free mold design optimization for qualified customers.

Hengshui Dongmo Precision Metal Products Co., Ltd

Contact now

 

Hot Tags: custom precision metal stamping and drawing dies; hardware tool stamping dies, China, suppliers, manufacturers, factory, buy, price, made in China, Sound insulation board mould, Continuous Stamping Die, Progressive Die Stamping, Square pipe punching die, Punching die, Round pipe punching die

Send Inquiry