Professional precision stamping die supplier
High precision stamping quality suppliers
Swivel caster mounting bracket forming mold device, including special-shaped convex-concave upper mold, special-shaped concave mold lower template, ejector, lower mold seat, guide post and upper mold seat. The special-shaped convex-concave upper mold is installed on the upper mold seat. The mold base is fixed on the guide pillar, the lower end of the guide pillar is connected with the lower mold base, the lower mold base of the special-shaped die is installed on the lower mold base, the lower mold base of the special-shaped die is connected with the ejector, and one side of the ejector A mold positioning pin is installed, a spring is arranged between the lower mold seat and the ejector, and the bottom of the lower mold seat is provided with a pad. The utility model has the advantages of simple operation, energy saving and environmental protection, and can meet the needs of the market.
Qroduct Details | Company Information | ||
Qroduct name | Swivel caster mould | Main products | Stamping die Stamping parts |
Application | hardware, | Productive forces | Stamping: 2-3 million pieces/month |
Material | ST14-ST16S | Mould: 40-60 sets/month | |
Standard Parts | MISUMI | Related certificates | ISO9001 |
Template flatness | +/-0.005mm | Package | According to customer requirements |
Quantity | 1 set | Application field | Aviation, automobiles, home appliances, medical, hardware, construction, |












Mold common sense
Size variation
(8) Blanking deformation: Some bending parts cannot allow the overlap of the material, and must be dropped every time, or the disc strain can be overcome by pressure pad or shearing à.
(9) Bending deformation: squeeze the material at the upper bend; the proximal hole is deformed by tensile force, and the force is unevenly bent à the inclined punch is not long enough.
(10) Punching and shearing deformation: the material is distorted and uneven, the size increases or the eccentricity is asymmetrical.
(11) Impact deformation: The product is blown out by air pressure that is too strong or gravity falls and impacts deformation.
(12) Floating chip extrusion: the extruding variation of waste material floating up or fine chips remaining on the die surface or foreign body.
(13) Improper material: The width or thickness of the material, or the improper material or material hardness, can also cause defects.
(14) Poor design: poor engineering arrangements and poor clearance settings, unless the design is changed, it is difficult to overcome
Hot Tags: swivel caster mould, China, suppliers, manufacturers, factory, buy, price, made in China, Swivel Caster Mould, Continuous stamping of casters
