Conveyor Bearing Housing Mould

Conveyor Bearing Housing Mould
Product Introduction:
Conveyor bearing housing mould Supply idler bearing die 305 bearing die stamping die Matters needing attention on bearing housing processing 1. Have enough life; 2. The coordination of the inner and outer rings of the bearing requires that the bearing not only be able to move axially in the...
Send Inquiry
Description
Technical Parameters

Conveyor bearing housing mould

Supply idler bearing die 305 bearing die stamping die

DSC03187306


Matters needing attention on bearing housing processing

1. Have enough life;

2. The coordination of the inner and outer rings of the bearing requires that the bearing not only be able to move axially in the bearing seat (to adapt to the thermal expansion and contraction of the cylinder), but also be able to transmit the torsional moment, and at the same time, it must be able to compensate the dynamic (static) load of the cylinder. The journal declination angle caused by the lower deformation;

3. The structure of the bearing seat should be easy to install, lubricate, clean, inspect and maintain.

Dongmo

As a domestic foundry, in the early stage of processing the bearing seat, professional engineers optimized the process structure of the bearing seat according to the operating characteristics of the ball mill. The reasonable structure can keep the operation at a lower temperature during operation and effectively prolong the service life!

3333

34 567

 

Hot Tags: conveyor bearing housing mould, China, suppliers, manufacturers, factory, buy, price, made in China, 304 bearing seat mould, Conveyor Stamping Bearing Seat Die, Bearing Seat Sealing Cap Mould

Send Inquiry